Grinding Barite Process by Ultrafine Mill

Grinding Barite Process by Ultrafine Mill

Some users are engaged in the production of barite grinding. They want to know what their grinding equipment is and the design principle of the barite grinding production line and the production process of the production line. The ultra-fine grinding machine developed by the company is heavy. Some problems in the production of spar powder are briefly introduced, in order to let users know more about this equipment.

Because the Morse hardness of barite is relatively low, about between grades 3 and 3.5, there are many options for milling equipment. The general mill can complete the grinding of barite. For the application of the enhanced ultra-fine mill developed by the company in the production of barite grinding, the design principle of its production line and the production process of the production line, the details are as follows.

The ground powder material is selected by the powder separator driven by the wind blown into the production system. The fineness of the material that meets the requirements can pass through the classifier and vice versa. The powder material passing through the classifier is the finished material, which can be collected by the dust collector. The material that cannot pass through the classifier can only be re-dropped into the grinding chamber under the action of gravity for secondary grinding until the fineness of the powder is acceptable.

1. Ultrafine Mill Grinding Powder Production

The principle of the company's ultra-fine mill grinding machine is that the motor drives the reducer in the equipment to rotate at a high speed, and the reducer drives the plum blossom frame in the equipment to rotate, thereby driving the grinding roller on the plum blossom frame to rotate. When the material falls between the roller sleeve and the grinding ring, the rotating roller causes the roller sleeve to receive an outward centrifugal force to crush the material between the roller sleeve and the grinding ring. The crushed material will fall into the bottom of the grinding chamber, then be thrown up by the bottom blade, and fall back between the grinding roller sleeve and the grinding ring, so as to reciprocate.

2. Equipment Design Principles For Production Lines

There are many equipments in the milling production line, such as crusher, mill, feeder, stocker, etc. The main principles of the design of the production line are the principle of matching the material size before and after, the matching principle of the processing volume before and after, and the special material. Principles such as warehouse design. In the above principle, the principle of matching the material before and after the material must be introduced. However, the design principle of the secondary warehouse is that a silo is generally installed in the grinding production to store the material and also to vibrate. The feeding machine quantitatively feeds, avoiding the material blocking phenomenon caused by too much feeding material, and ensuring the smooth progress of production.

3. Production Line Process

To understand the production process of barite grinding, it is necessary to understand the equipment of the production line, and the flow direction of the material is exactly the same as the production line process. After being crushed and broken, the barite is sent to the silo by the hoist, and then transported to the ultrafine mill main machine by the electromagnetic vibrating feeder. The ground powder material is blown by the wind blown by the blower. The powder is selected at the powder sorting machine, and the material passing through the classifier is collected by the dust collector through the pipeline, which is the process of the entire production line.